Myths About Oil Tank Removal & Installations

There are misconceptions related to the damage of property when it comes to remove the oil-tank. The owners of the house are very much concerned about the adverse effects a oil-tank removal project would have upon their property. But, it isn’t that much invasive as it seems. Ignoring the worst case scenarios, it is an easy task to restore the state of your property back to the original. But, it needs professional consideration.

Myths About the related Time –Consumption

It isn’t a worrisome aspect to take into account. It depends upon the condition of the site & the skills of the Contractor-team. Of course, a highly skilful team of Oil-tank Specialists would take lesser amount of time to complete this task as compared to the amateur ones. You can easily learn about the outlines of oil-tank Installation/removal plan & can easily anticipate the time it would take thereafter.

Matter Of Hours & not Weeks or Months

Oil Tank Removal:

The oil tank installed in our homes doesn’t take a lot of time. Initially, a pumping truck is taken into use to remove all the fuel existing in the tank. This truck is either privately owned by the contractor or hired for your service. The whole lot of oil obtained from the tank is accommodated in the tank/reservoir located at the overhead of pumping truck. The servicing team will make sure that no damage is done to the property & no oil is spilled on the flooring's.

The next step is to locate the tank & excavate the top of the oil-tank using a backhoe, digging equipment. In case your tank is inaccessible through the machine, manual help needs to be taken which will increase the time span.

After exposing the tank, a cut is made upon its surface for internal cleaning purpose. The tank is then removed from the ground for further assessment.

Oil tank installation:

New oil tank installation is done before the removal of previously installed tank.  New tank can be installed above ground tank & connected to the Burning Furnace. For newer piping-work, extra time is needed. After the new tank is connected, the old one is disconnected & check for any problem if it exists.